Cherry H681-8C Riveter Pulling Head

Cherry Riveter pulling head

H681-8C Countersunk Head (MS 20426 )
A separate pulling head is required for each diameter CherryLock® rivet.
It is acceptable that countersunk (C) pulling heads be used for installing both universal and counter-sunk head CherryLock® rivets.
These heads fit directly on all Cherry Hydro-shift Riveters.

AVAILABLE EXTENSIONS
H681 pulling heads may he obtained in four extended lengths to reach into difficult access areas.
These are 2", 6", 12" & 24" extensions additional to the normal head length of 2 13/16".
To order extension heads, specify correct pulling head number from the chart and add extension length required.

Example:

• H681-6C-E2 for 2”
• H681-6C-E12 for 12”

Nose assy fits G784 Riveter