'The No.1 suppliers of professional tools & equipment
to the aerospace & engineering industry’
02380 455443

Gesipa


Gesipa 1457665 Taurus 1 Pneumatic Rveter - Rivet Gun (7560001)

Gesipa 1457665 Taurus 1 Pneumatic Rveter - Rivet Gun Sets blind rivets from 2.4 up to 3.2 mm Ø all materials and up to 4 mm Ø alu/steel (max. mandrel dia. 2.5 mm) (7560001)

Gesipa 1457771 Taurus 2 Pneumatic Rveter - Rivet Gun (7570007)

Gesipa 1457771 Taurus 2 Pneumatic Rveter - Rivet Gun Sets blind rivets up to 5 mm Ø all materials and up to 6 mm Ø alu/steel (max. mandrel dia. 3.2 mm) (7570007)

Gesipa 1457771 Taurus 2 Pneumatic Rveter - Rivet Gun (7570007)

Gesipa 1457771 Taurus 2 Pneumatic Rveter - Rivet Gun Sets blind rivets up to 5 mm Ø all materials and up to 6 mm Ø alu/steel (max. mandrel dia. 3.2 mm) (7570007)

Gesipa 1457871 Taurus 3 Pneumatic Rveter - Rivet Gun (7580002)

Gesipa 1457871 Taurus 3 Pneumatic Rveter - Rivet Gun Sets blind rivets up to 6.4 mm Ø all materials (max. mandrel dia. 4.5 mm) (7580002)

Gesipa 1457871 Taurus 3 Pneumatic Rveter - Rivet Gun (7580002)

Gesipa 1457871 Taurus 3 Pneumatic Rveter - Rivet Gun Sets blind rivets up to 6.4 mm Ø all materials (max. mandrel dia. 4.5 mm) (7580002)

Gesipa 1457964 Taurus 4 Pneumatic Rveter - Rivet Gun (7590001)

Gesipa 1457964 Taurus 4 Pneumatic Rveter - Rivet Gun Sets blind rivets up to 6.4 mm Ø all materials and upto 8 mm Ø alu (max. mandrel dia. 4.5 mm) (7590001)

Gesipa 1457964 Taurus 4 Pneumatic Rveter - Rivet Gun (7590001)

Gesipa 1457964 Taurus 4 Pneumatic Rveter - Rivet Gun Sets blind rivets up to 6.4 mm Ø all materials and upto 8 mm Ø alu (max. mandrel dia. 4.5 mm) (7590001)

Gesipa 1458002 Taurus 5 Pneumatic Rveter - Rivet Gun (7600001)

Gesipa 1458002 Taurus 5 Pneumatic Rveter - Rivet Gun Blind rivets above 6.4 mm Ø all materials and lockboltsup to10 mm Ø with corresponding pulling heads (Pulling heads Not included.)(7600001)

Gesipa 1458002 Taurus 5 Pneumatic Rveter - Rivet Gun (7600001)

Gesipa 1458002 Taurus 5 Pneumatic Rveter - Rivet Gun Blind rivets above 6.4 mm Ø all materials and lockboltsup to10 mm Ø with corresponding pulling heads (Pulling heads Not included.) (7600001)

Gesipa 1458022 Taurus 6 Pneumatic Rveter - Rivet Gun (7610002)

Gesipa 1458022 Taurus 6 Pneumatic Rveter - Rivet Gun Blind rivets above 6.4 mm Ø all materials and lockbolts up to 10 mm Ø with corresponding pulling heads (Pulling Heads Not Included).(7610002)

Gesipa 7560001 Taurus 1 Pneumatic Rveter - Rivet Gun (1457665)

Gesipa 7560001 Taurus 1 Pneumatic Rveter - Rivet Gun Sets blind rivets from 2.4 up to 3.2 mm Ø all materials and up to 4 mm Ø alu/steel (max. mandrel dia. 2.5 mm) (1457665)

Gesipa 7610002 Taurus 6 Pneumatic Rveter - Rivet Gun (1458022)

Gesipa 7610002 Taurus 6 Pneumatic Rveter - Rivet Gun Blind rivets above 6.4 mm Ø all materials and lockbolts up to 10 mm Ø with corresponding pulling heads (Pulling Heads Not Included).(1458022)

Logo

Gesipa Taurus Pneumatic Rivet Gun - Riveter

Gesipa Taurus Pneumatic Hydro Rivet guns

Patented jaw system

  • The three jaws move in separate channels while beingunder forced control.
  • The jaws are pressed onto the mandrel by using com pressed air instead of spring force – the force being ten times higher than usual.
  • Due to the high pressure the jaws immediatelycling to the mandrels upon triggering the rivetingprocess, only then the pulling movement starts.

GESIPA®-system – decisive advantages

  • The complete stroke of the tool is used for setting the rivet guaranteeing a reliable setting process.
  • The immediate and non-slip grip of the mandrel reduces abrasion and troublesome soiling.Since the jaws do not slide along the mandrel, the wear and tear of the jaw profiles is reduced.
  • Lower costs due to longer service life and low requirements regarding maintenance and spare parts needed.

The GESIPA® System uses the compressed air required for the setting process twice. First, to set the blind rivet and secondly, to extract the spent mandrel. Dual use of the
compressed air means no expensive, fresh compressed air is needed which other tools on the market constantly need just to extract the spent mandrel. And, last but not least,
noise emission from the TAURUS®-tools is extremely low

Find Us

Contact Us

HEAD OFFICE
Unit 8 Mitchell Point
Ensign Way Hamble Le Rice
Southampton Hampshire
SO31 4RF UK

Phone: 02380 455443
Fax: 02380 455081
Email: sales@aptoolsltd.co.uk
Company No. 4567854

Recent Tweets

Site Map

Copyright © 2015 AP Tools Ltd. All rights reserved. Website Design by Akira Studio Ltd