'The No.1 suppliers of professional tools & equipment
to the aerospace & engineering industry’
02380 455443

Hand Pliers Hi-Lok


Hi-Lok CRP100 Collar Removal Pliers feature a diamond shaped jaw

Hi-Lok CRP100 Collar Removal Pliers feature a diamond shaped jaw which allows the pliers to ''surround'' the collar, making solid 4-point contact over collars from .25'' to .55'' in diameter. (-5, -6, -8, & -10 Hi-Lok® and Hi-Lite® collars)

Hi-Lok CRP100 Collar Removal Pliers offer a more aggressive offset of about 45°

Hi-Lok CRP100 Collar Removal Pliers offer a more aggressive offset of about 45°. The jaw serrations are perpendicular to the collar seating surface when the handles are laid flat, and angle at about 45° if the flat part of the head is rested on the collar seating surface.

ZHP100 Hi-Lok Removal Pliers

ZHP100 Hi-Lok Removal Pliers with diamond-cut jaws

Hand Pliers  Hi-Lok

The CRP100 Collar Removal Pliers from Omega Technologies feature a diamond shaped jaw which allows the pliers to ''surround'' the collar, making solid 4-point contact over collars from .25'' to .55'' in diameter. (-5, -6, -8, & -10 Hi-Lok® and Hi-Lite® collars).

Vertical ''teeth'' inside the jaw bite into collars to give maximum gripping force. The handle is offset at approximately 30° to provide good access over other fasteners or structure. With a ''strong grip'' removal torques up to 200 lb-in have been reported on aluminum collars. (maximum achievable torque will be less on Steel and Titanium collars)

Where access is still a problem, or if additional torque is required, we recommend these other fine options:

Plier Style: CRP2979U provides additional offset for added clearance.

Socket Style: OMSK Series or Savi Series. Both styles of sockets can be used with conventional square drive ratchet wrenches.

Wrench Style: REM100 series tools, available in flat, offset, open-end, and crow-foot styles.

 CRP2979U Collar Removal Pliers offer a more aggressive offset of about 45°. The jaw serrations are perpendicular to the collar seating surface when the handles are laid flat, and angle at about 45° if the flat part of the head is rested on the collar seating surface.

The jaw opening varies from .18'' to .45''. This is wide enough for -5, -6, & -8 collars, and with a ''strong grip'', torques up to 150 lb-in are reported on aluminum collars. (maximum achievable torque will be less on Steel and Titanium collars)

Where access is still a problem, or if additional torque is required, we recommend these other fine options:

Plier Style: CRP100 provides somewhat less offset, and larger jaw capacity.

Socket Style: OMSK Series or Savi Series. Both styles of sockets can be used with conventional square drive ratchet wrenches.

Wrench Style: REM100 series tools, available in flat, offset, open-end, and crow-foot styles.

Find Us

Contact Us

HEAD OFFICE
Unit 8 Mitchell Point
Ensign Way Hamble Le Rice
Southampton Hampshire
SO31 4RF UK

Phone: 02380 455443
Fax: 02380 455081
Company No. 4567854

Recent Tweets

Site Map

Copyright © 2015 AP Tools Ltd. All rights reserved. Website Design by Akira Studio Ltd